TEKUNI / Wire and cable processing

Fully automatic wire processing machines

A fully automatic machine feeds, cuts, strips, crimps, inserts seals and marks the wire without an operator – and checks quality at every step. The result is higher output, less scrap and the same quality on every wire, whatever the shift. Tekuni supplies the full Komax range in Bulgaria, with configuration, commissioning, training and local service.

Choose a technology

Harness and panel linesKomax Omega and Zeta for finished harnesses and control cabinet wires.Automatic crimping machinesKomax Alpha, Gamma and CrX for double-sided crimping from 0.13 to 95 mm².Twisting machinesKomax Sigma for UTP pairs at up to 5 m/s.Coaxial and data cablesSchleuniger CoaxCenter and Komax Lambda for Automotive Ethernet and coax.High-voltage cablesKomax Lambda 141 and 240 for EV cables.Process modulescrimp, seal, ferrule, sleeve and tinning modules for Komax machines.

Product catalogue

CM 1/5 GS

CM 1/5 GS Ferrule Module – Processes up to five different tape-mounted ferrule types with varying lengths using Quadro crimp design for flexible ferrule production.

CM 04 Duo

CM04 Duo Ferrule Module – Sequential processing of up to two loose ferrules (4 and 6 mm²) on pre-stripped wires using Quadro crimping.

SLU 3000

SLU 3000 Seal Station – Seal insertion station (10.5 mm or 17 mm) integrated into fully automatic cut/strip/terminate machines for weatherproof wire ends.

Lambda X Series

Fully modular platform for semi-automatic or fully automatic processing of complex connector systems with scalable configurations.

Lambda 4 Series

Modular base for fully automatic multi-step contact assembly with manual insertion and depositing, optimized for structured workflows.

TM4000

Modular platform linking single-step machines and complete production systems for efficient scaling of cable assembly processes.

Lambda 5 Series

Lambda 5 Platform – Modular base for fully automatic multi-step contact system assembly designed for scalable automation.

Lambda 3 Series

Lambda 3 Platform – Compact entry-level platform for high-quality semi-automatic cable assembly in limited space.

Lambda 141

Compact high-voltage cable solution with quick-change tooling, three processing modules and integrated cleaning for stable HV production.

Lambda 240

High-voltage cable processing for smaller quantities and different HV cable types; fast changeover supports flexible product switching.

Product changeover in seconds

On an automatic machine a changeover means loading a program, not resetting the mechanics. With automatic crimp applicator change, developed by Komax together with TE Connectivity, a change takes about one minute, and Komax reports up to 50 % more output per shift.

Start with one machine, expand in stages

You do not need a full line on day one. Alpha 520 is a good first machine for frequent product changes; process modules add operations to an existing machine, and TM4000 links individual machines into a line. Tekuni plans the configuration with you based on real volumes.

Frequently asked questions

When does full automation make sense?

When volumes grow, the number of variants is high, or customers require documented quality for every wire. Tekuni calculates the payback from your products and volumes.

Can the machine connect to ERP or MES?

Yes. Komax machines exchange production data with ERP and MES systems through the WPCS and MIKO interfaces.

Can an existing machine be upgraded?

In most cases, yes – with extra crimp, seal or marking modules. Tekuni checks compatibility by serial number.